Deutch-Tewes

Belts & Filters

admin — Tue, 07 Dec 2010 10:11:50 +0000

We produce over 1000 kinds of fuel and belt products. We offer high-quality fuel, oil and air filters. We have reliable-in-operation filters for different models of automobiles. Our filters use special types of filters paper as filters. Air filters are produced using special polymers that prevent unpurified air from penetration. Oil filters are produced for different engines. Their bodies are made of high-quality steel. We offer a wide range of such filters. We also offer driving belts for a gas-distributing mechanism and wedge belts. All our belts are using the rubber of some special composition that guarantees their resistance to temperature influence and wear and tear when being bent.

Cooling system

admin — Tue, 07 Dec 2010 10:11:33 +0000

We have rich experience for producing and exporting cooling systems including water pumps, radiators, and thermostat. Now we can offer over 1,000 kinds of such products. We select the best materials including the aluminum, bearing, water seal, impeller and kits, choose the top-ranking quality control and management system, make use of the international standard producing machines and production lines and producing technology, take advantage of the most strict quality checking system, in order to make sure that we provide perfect products to our customers.

Our products cover European, American, South American, Middle East, African and South East Asian markets. All our staffs dedicate themselves to meet the customer’s satisfaction and requirement and make smooth communication with all our customers sincerely. In a word, all our working is based on this target.

Engine

admin — Tue, 07 Dec 2010 10:11:19 +0000

We sell high quality engine spare-parts for European, Japanese, Korean and American automobiles. Gaskets are produced using the exclusive equipment worked out by the engineers of our technical department. The equipment, which is the last word in engineering, enables us to make special coatings preventing gaskets from sticking to the block and make them more flexible. The production of gaskets is based on the use of improved asbestos-free materials. We offer our customers pistons of more than 400 modifications for diesel and gasoline engineers. There are also piston rings with different coatings, which are completely smooth and non-obliterated. But it reduces wear and tear. We sell different bushes and shells, intervening shaft bushes, connecting-rod bushes, valves, guiding bush valves. The materials used for the production of these goods and engineering methods of their production ensure the high quality of these goods. In addition, the cam followers offered by our company are also produced using up-to-date equipment and under complete engineering control. All this guarantees their quality and reliable operation.

Ignition

admin — Tue, 07 Dec 2010 10:11:05 +0000

We produce over 700 kinds of Ignition products. Ignition wires in systems are silicones coated, that prevents them from over-heating in work. A high charge flows through a copper wire core, which prevents any interference. A plug terminal is made of stainless steel to exclude any contact oxidation. Wire ends are attached in a special way that improves their contact with a plug terminal. Such wires show reliable work even in the conditions of 40000 voltages. Plugs in diesel and gasoline engines ensure regular work in various temperature conditions. High resistance to corrosion characterizes a ceramic case of spark plugs. We have 250 models of spark plugs to offer for sale. We also sell some other parts to carry out repairs of an ignition system, i.e. trampers and spare parts for them – lids, contacts, runners, ignition locks and contact sets for them. High quality is paramount from the development through the selection of material to production, and this is reflected in our products. Equipped with modern production systems, it provides the ideal conditions for optimal products in the usual high quality. We are carrying out our basic idea “customer first” all the time.

Quality is not only the business of manufacture department but also of the others such as sales department, the latter can develop their quality mentality via quality management activity, thus urge comprehensive quality of the whole company perfect and elevating continuously.

As per quality management system, each phase, from raw materials entrance to ex-factory of produce, will be performed by standard management in order to avoid occurring inferior quality.

We are carrying out basic idea of “customer first” by form of “be meticulous in creation and seek for quality.”

Electricity

admin — Tue, 07 Dec 2010 10:10:52 +0000

Spare parts and component to repair and maintain fuel systems in automobiles We have high-quality analogues of originally produced parts for European, Japanese, Korean automobiles. All our disposal there are more than 200 modifications of mechanical fuel pumps produced up to the world’s standards using high-quality materials. In addition to this there are more than 90 modifications of electrical pumps. We sell sprayers of diesel and injector fuel burners and complete sets of fuel burners. We have a wide choice of different sensing elements and relays of high quality that make the automobile cooling system work more efficiently. Spare parts and components to make repairs of electronic and electric system of automobiles We deal in high-quality analogues of original parts for European, Japanese, Korean and American automobiles. They are starters and generators for diesel and petrol engines of more than 200 modifications made of high-quality materials. There is a big variety of spare-parts to carryout repairs of starters; i.e. starter drives, relays, clutches, brushes, plugs and etc, and generators; i.e. collectors, relay regulators and etc.We also offer our customers a wide range of different high-quality relays and sensing elements which are reliable in operation clue to their quality and advanced technologies of their production.

We deal in high-quality analogues of original parts for European, Japanese, Korean and American automobiles. They are starters and generators for diesel and petrol engines of more than 200 modifications made of high-quality materials.

There is a big variety of spare-parts to carryout repairs of starters; i.e. starter drives, relays, clutches, brushes, plugs and etc, and generators; i.e. collectors, relay regulators and etc.

We also offer our customers a wide range of different high-quality relays and sensing elements which are reliable in operation clue to their quality and advanced technologies of their production.

Steerings

admin — Tue, 07 Dec 2010 10:10:16 +0000

We have a wide choice of suspension and steering elements for European, Japanese, Korean and American automobiles, i.e. ball joints, steering rod points, stabilizer rods, steering levers, steering rods and mechanical and hydraulic racks. All these goods are produced using advanced technology methods to guarantee their quality control. Now we offer more than 2000 different kinds of steering parts. No sector has a more voracious appetite for new ideas, or a more rigorous insistence on the highest quality and value. That is what our company differs from other competitors. Nowadays, we have started to deal in new goods, i.e. hydrobooster pump.

Rubber Parts

admin — Tue, 07 Dec 2010 10:09:54 +0000

We sell more than 2000 types of rubber parts, such as engine cushions, rubber mount, silent blocks, cushion for shock-absorber stanchions, dust traps for constant velocity joints and steering gears, carburetor gaskets, etc. Our rubber parts have set standards for many years and meet the highest requirements.

C.V. Joints

admin — Tue, 07 Dec 2010 10:09:32 +0000

We sell constant velocity joints and semi axles for European, Japanese, Korean and American automobiles. Now we have more than 1000 types of such items. Superior quality derives from cutting-edge manufacturing means. To achieve such an idea the company has been investing a tremendous amount of fund to introduce top-grade precision machinery processing equipment such as digital controlled lathe, and detection instruments. On the leading hardware, the company keeps attracting technical elites to form a technical team of leading standards, and makes full use of new technologies; workmanships and materials to develop quality products supply markets. For our customers, we are committed to our product quality.

Bearings

admin — Tue, 07 Dec 2010 10:09:03 +0000

The production of bearings is certificated in accordance with ISO 9001 standard. We offer our customers a big variety of bearings ranging from very small to big ones. All technological processes of turning treatment, polishing and assembling are automated that respectively increases the precision of the operations and quality of goods. Here is a short list of the bearings we offer:

· Deep Groove Ball Bearings
· Single Row Angular Contract Ball Bearings
· Cylindrical Roller Bearings
· Thrust Ball Bearings
· Pillow Blocks Bearings

We have a big variety of bearings all models of European, Japanese, Korean and American automobiles.

Brakes

admin — Tue, 07 Dec 2010 10:08:47 +0000

Our company can offer customers brake pads and shoes for European, Japanese, Korean and American automobiles. All parts of our brake systems meet the requirements of the world standards. Brake pads have a constant coefficient of friction when the temperature varies from 15 to 650°C. They are highly resistant to wear and tear. Their durability is up to 60000 km and even more depending on the working conditions. Brake shoes are made of a special material with some impurities that reduce the noise in the operation. The brake pads and shoes offered by us wear out a break drum uniformly securing effective braking without vibration within the whole period of use. A special polymeric coating makes metal parts resistant to corrosion. At the moment we are ready to sell more than 1000 types of brake pads and shoes. We also produce brake drums with high quality alloyed cast-iron. They are highly resistant to a maximum brake loading and to wear and tear. In addition, there are different cylinders; the main and working brake cylinders; hoses and supports with their spare parts. High-quality material and advanced technologies of treatment make our goods durable and reliable in operation. We are one of those companies who offer brake cylinders made both of traditional materials and aluminum alloys, making our goods lighter and more reliable in operation. Remark: we can offer our customers different spare-parts and components to repair the brake system.